Western Digital WD1500ADFD: King Raptor
by Gary Key on February 8, 2006 1:30 AM EST- Posted in
- Storage
Feature Set and Test Setup: WD1500ADFD
Both drives feature a 1.2 million MTBF hour rating and receive a 24-hour factory burn-in while offering a 5-year warranty. The 150GB version will run approximately $300 compared to $169 for the current 74GB drive. The Raptor X edition is currently listed in the $350 range.
Our test platform differs slightly from the previous version with the inclusion of the Asus A8N-SLI Premium board and the 81.98 video driver set. All drives are tested with NCQ or TCQ off unless otherwise noted. We have added the Samsung SP2504C and Maxtor MaXLine III 7L300S0 drives into our benchmark results for comparison to the Western Digital Raptor series.
Our test suite consists of the standard benchmarks utilized at this time. We will be expanding our application and game benchmarks in the near future to further provide real world test results across a variety of programs.
The WD740GD-00FLA1 is listed on the charts as "Western Digital Raptor WD740GD-00FLA1 (74GB)" in the description field. The replacement drive for this model and the WD740GD-00FLA2 is the WD740GD-00FLC0. The WD740GD-00FLC0 is listed on the charts as "Western Digital Raptor WD740GD-00FLC0 (74GB)" in the description field.
Specification | Western Digital Raptor WD1500ADFD | Western Digital Raptor WD740GD-00FLC0 |
Capacity: | 150GB | 74GB |
Interface: | SATA 150 MB/s | SATA 150 MB/s |
Rotational Speed: | 10,000 RPM | 10,000 RPM |
Buffer Size: | 16 MB | 8 MB |
Average Latency: | 2.99 ms (nominal) | 2.99 ms (nominal) |
Read Seek Time: | 4.6 ms | 4.5 ms |
Write Seek Time: | 5.2 ms (average) | 5.9 ms (average) |
Track to Track Seek Time: | 0.4 ms (average) | 0.6 ms (average) |
Full Stroke Seek Time: | 10.2 ms (average) | 10.2 ms (average) |
Transfer Rate - Buffer to Disk: | 84 MB/s (sustained) | 72 MB/s (sustained) |
Number of Heads: | 4 | 4 |
Number of Platters: | 2 | 2 |
Command Queuing: | Native Command Queuing | Tagged Command Queuing |
Acoustics- WD: | Idle - 29dBA Seek Mode 0 - 36dBA |
Idle - 32dBA Seek Mode 0 - 36dBA |
Other Features: | TLER - RAID Specific RAFF FlexPower |
FlexPower |
Both drives feature a 1.2 million MTBF hour rating and receive a 24-hour factory burn-in while offering a 5-year warranty. The 150GB version will run approximately $300 compared to $169 for the current 74GB drive. The Raptor X edition is currently listed in the $350 range.
Performance Test Configuration | |
Processor: | AMD Athlon 64 3500+ (Venice E4) utilized for all tests |
Memory: | 2 x 512MB OCZ PC4800 Elite Platinum Settings- DDR400 at (2-2-2-5, 1T) |
Hard Drive(s): | 1 x Maxtor MaXLine III 7L300S0 300GB 7200 RPM SATA (16MB Buffer) 1 x Samsung SpinPoint P Series SP2504C 250GB 7200 RPM SATA (8MB Buffer) 1 x Western Digital Raptor WD740GD-00FLC0 74GB 10,000 RPM SATA (8MB Buffer) 1 x Western Digital Raptor WD1500ADFD 150GB 10,000 RPM SATA (16MB Buffer) |
System Platform Drivers: | NVIDIA Platform Driver - 6.70 |
Video Card: | 1 x Gigabyte 6600GT (PCI Express) for all tests |
Video Driver: | NVIDIA nForce 81.98 WHQL |
Cooling: | Thermaltake Big Typhoon |
Power Supply: | OCZ Power Stream 520 |
Operating System(s): | Windows XP Professional SP2 |
Motherboards: | Asus A8N-SLI Premium |
Our test platform differs slightly from the previous version with the inclusion of the Asus A8N-SLI Premium board and the 81.98 video driver set. All drives are tested with NCQ or TCQ off unless otherwise noted. We have added the Samsung SP2504C and Maxtor MaXLine III 7L300S0 drives into our benchmark results for comparison to the Western Digital Raptor series.
AnandTech Storage Test Applications | |
iPEAK- Business Winstone: | A capture and test playback of all I/O operations within VeriTest's Business Winstone 2004 suite. |
iPEAK- Content Creation Winstone: | A capture and test playback of all I/O operations within VeriTest's Multimedia Content Creation Winstone 2004 suite. |
Synthetic Benchmarks: | WinBench 99 HD Tach 3.01 Everest Ultimate Edition 2.50 PCMark 2005 - HD Tests |
Single Application Tests: | Timed tests of file copying, zipping, and unzipping operations. |
Multi-Tasking Tests: | Timed tests of file zipping and data import operations. |
Game Load Tests: | Half-Life, Doom3, and Command & Conquer: Generals |
Our test suite consists of the standard benchmarks utilized at this time. We will be expanding our application and game benchmarks in the near future to further provide real world test results across a variety of programs.
The WD740GD-00FLA1 is listed on the charts as "Western Digital Raptor WD740GD-00FLA1 (74GB)" in the description field. The replacement drive for this model and the WD740GD-00FLA2 is the WD740GD-00FLC0. The WD740GD-00FLC0 is listed on the charts as "Western Digital Raptor WD740GD-00FLC0 (74GB)" in the description field.
51 Comments
View All Comments
shady28 - Sunday, April 9, 2006 - link
Kinda bogus review here. How on earth can you put a SATA drive in comparison to other SATA drives, then draw conclusions about SATA vs SCSI?? The answer is you can't, especially in regards to SATA being 'ready' for use in big fileservers. It's a cheap alternative to SCSI, not a performance alternative. Check the link below for fileserver iometer (IOPs) benchmarks of many different drives, and you'll find that the top SCSI drives demolish the top SATA drives with nearly double the IOPs ratings :
http://www.storagereview.com/comparison.html">http://www.storagereview.com/comparison.html
Kensei - Friday, February 10, 2006 - link
I've said it before but I'll say it again... Gary sets the standard for technical writing excellence. His work should be studied closely by all who aspire to do this type of work. I hope you're at least 26 or older becasue if you're writing like this at 19, 20 or 21, I think I'm going to get sick... with jealousy.Kensei
SpecOps - Friday, February 10, 2006 - link
I would have liked to see the "value Raptor" in the tests as well, so we can get a better picture of price vs. performance.Gary Key - Friday, February 10, 2006 - link
I will see if we can get a WD4000 series and update the article or at least have it for the RAID follow up. We have the new WD 500GB drive to test also.JustAnAverageGuy - Thursday, February 9, 2006 - link
Good article Gary, look forward to more in the future.One of the few editors who actually reads and replies to more than just one or two comments. :thumbsup;
- JaAG
CrystalBay - Wednesday, February 8, 2006 - link
Gary , you have a very proficient writing ability . I noticed it on your first review at AT keep up the good work...MadAd - Wednesday, February 8, 2006 - link
I just checked and prices for these in the UK is £210 - its almost the price of a scsi drive ffs (a 147gig hitachi u320 is only £50 more).
Im not quite sure what market segment these are aimed at, I just hope they dont shoot themselves in the foot being priced so close.
yacoub - Wednesday, February 8, 2006 - link
Gary - Thanks for this excellent review and for addressing the two primary complaints I had with the last harddrive review here: The old Samsung drives listed and lack of SP2405C and the tiny decibel test graph that was hard to read and draw conclusions from.This test has a great lineup of drives tested and much better graphs. Very nicely done!
Gary Key - Thursday, February 9, 2006 - link
Thank you and actually everyone for the comments. We have certainly listened to the requests and hopefully our improvements over the course of the next few articles will be satisfactory for everyone.
Although I have had some personal issues with Samung drives in the past I have to give them credit for producing a very good drive in the SP2504c. It would be my drive of choice in a HTPC or SFF setup at this time if you need a silent drive. The performance of the drive is competitive with others in its class for the most part at a very good price point. I tested the drive last night in a sound enclosure and there was only a 5 decibel difference between idle and constant read/write operations. I believe some of the additional decibel readings in the article is our equipment picking up noise from the drive cage. We will continue to refine this process for testing but the readings we reported were very consistent given the environmental conditions in the test room.
Jeff7181 - Wednesday, February 8, 2006 - link
I agree with those that say a Part 2 with RAID testing would be interesting.